Lowara DLM80/A Submersible Pump Without Floatswitch 240v
BEST ONLINE PRICES
FREEPHONE 0800 112 3134 if you've seen it cheaper.
* Available where Guaranteed Stock Icon Appears Below
The DLM80/A submersible electric pump from Lowara is constructed from cast iron and stainless steel and has a single channel impeller. Designed to handle solids-laden waste water, with solids up to 45 mm in diameter. Unit without floatswitch, supplied with control box & 10 meters of cable to control box then an extra 1.5 metres.
The pump is suitable for the following applications:
- Pumping of sewage with suspended solids and filaments
- Emptying of sumps, septic tanks and waste water discharge tanks
- Draining of flooded excavations and marshy ground
The pump specifications are:
- Maximum liquid temperature: - 50°C with fully submerged pump, - 25°C with partially submerged pump
- Mechanical seal protected by sand labyrinth
- Maximum dimension of suspended solids: 45 mm
- Motor in a dielectric non-toxic oil bath, which ensures the lubrication of the ball bearings and a more efficient cooling.
- Power cord: H07RN-F: - single-phase: with plug, - three-phase: without plug.
- Insulation class 155°C (F).
- IPX8 protection.
- Maximum immersion depth: 5 m.
Please note this pump is the free-standing version.
SKU | 107560010XXXUBA |
---|---|
Manufacturer | Lowara |
Manufacturers Warranty | 2 Years |
Weight | 19.5 Kg |
Motor Size (kW/W) | 0.6kW |
Full Load Current (FLC) | 3.91 A |
Voltage | 240V 1Ph 50Hz |
RPM | 2850rpm |
Max Flow | 21m3/hr |
Max Head | 7.5m |
Material | Cast Iron |
Impeller Material | Stainless Steel |