Salamander CT85+ Xtra 2.5 Bar Single Positive Head Shower Pump (Inlet Isolators) with Noise Vibration Reduction Technology
BEST ONLINE PRICES
FREEPHONE 0800 112 3134 if you've seen it cheaper.
* Available where Guaranteed Stock Icon Appears Below
Salamander CT85+ Xtra 2.5 Bar Single Positive Head Shower Pump (Inlet Isolators) with Noise Vibration Reduction Technology - CT85PLUSXTRA
CT50+ Xtra, CT55+ Xtra, CT75+ Xtra and CT85+ Xtra are supplied with 15mm hoses with isolating valves on the inlets.
The Salamander range of CT Xtra Shower Pumps are tough, easy to fit general purpose twin booster pumps, this range will boost the hot and cold water supplies to thermostatic or manual shower mixer valves.
The CT85+ Xtra is suitable for boosting supplies to a variety of positive head applications including single wash basin, bath and kitchen taps.
It is also suitable for showers where the cold is from the mains water and the pump is converted to negative head.(Additional accessories may be required in this instance).
All Salamander pumps are supplied with antivibration (AV) couplers in order to limit the transfer of pump vibration to the associated pipe work. The beneficial effect of anti-vibration (AV) couplers is lost if they are bent or twisted on installation.
Each pump, whether a single or twin pump, is supplied with one or two straight anti-vibration (AV) couplers. This arrangement of couplers facilitates the connection of the supply pipework from any direction.
This pump is built using Salamanders unique technology, NVR (Noise / Vibration Technology)
NVR benefits
- Noise as low as 46dB
- A-weighted emission, sound pressure level at 1M, LP
- Vibration reduction
These pumps come with a 3 year warranty.
| Manufacturer | Salamander |
|---|---|
| SKU | CT85plusXtra |
| Weight | 3.9 Kg |
| Dimensions | 165mm High x 120mm Wide x 195mm Deep |
| Material | Plastic |
| Voltage | 240V 1Ph 50Hz |
| Motor Size (kW/W) | 246W |
| Cable Length | 1.5m |
| Hoses Included | Yes |
| Bar Rating | 2.5 Bar |
| Max Flow | 40 l/min |
| Max Head | 25m |
| Seal Type | Nitrile/Carbon/Ceramic |
| System Type | Positive |
| Head Impeller | Single Impeller |
| Pipe Size | 15 mm |
